Save 10% with a BlackVue DIY bundle
This page features our new BlackVue dashcam install bundle options. The BlackVue dashcam installation packs below are perfect for those looking for a one stop shop for a BlackVue dashcam and all the dash cam installation accessories needed to hardwire your new dashcam yourself or by a professional.
You don’t have to search for all the installation tools and accessories that you need to hard wire your BlackVue one by one! Simply purchase one of our install bundles below and you’ll have everything you need to seamlessly hard wire your BlackVue dashcam in your car, truck, or SUV.
Each install bundle option includes a BlackVue dashcam (The DR490-2CH, DR490L-2CH, the DR650S-1CH, the DR650S-2CH, or the DR650S-2CH-IR) and all the install accessories you will need for your new in-car camera.
The BlackVue Dashcam Install Bundles include:
- A Circuit tester: This tool, also called a test light, will help you locate your fuse box’s always on and switched fuses. This will come in handy when you connect the DR490L-2CH’s direct-wire harness or a Power Magic Pro to the fuse box.
- A Power Magic Pro: This BlackVue control module allows your dash cam to activate parking mode while your vehicle is turned off. The Power Magic Pro will detect if your car battery drops below the set volt threshold and will automatically turn itself off until you start your engine again. This will prevent you from ever having a dead car battery!
*Note: The DR490L-2CH Install Bundle does not include a Power Magic Pro. This is because a Power Magic Pro is not needed to hardwire the DR490L! The newly released DR490L-2CH has built-in low voltage cutoff when it is connected via the included direct-wire harness.
- Add-A-Circuit fuse taps These fuse taps crimp on to the end of the DR490L-2CH or the Power Magic Pro’s direct-wire harness so you can plug the harness in to your fuse box. Your vehicle's factory warranty will remain fully intact!