Save a bundle with a Vantrue DIY bundle
This page features our new Vantrue dashcam install bundle. The Vantrue dashcam installation pack below is perfect for those looking for a one stop shop for a "front and inside" Vantrue dashcam and all of the installation accessories needed to hardwire your new dashcam yourself (or to have it done by a professional).
You don’t have to search for all the installation tools and accessories that you need to hard wire your Vantrue one by one! Simply purchase one of our install bundles below and you’ll have everything you need to seamlessly hard wire your Vantrue N2 Pro dashcam in your car, truck, or SUV.
Each install bundle option includes a Vantrue forward-facing + inside-recording dashcam (the N2 Pro), GPS antenna, memory card, and all of the install accessories you will need for your new front and inside in-car camera system.
The Vantrue Dashcam Install Bundles include:
- A Circuit tester: This tool, also called a test light, will help you locate your fuse box’s "always on" and "switched" fuses. This will come in handy when you connect the Vantrue’s direct-wire harness to the fuse box.
- Vantrue hardwire kit: Vantrue's hardwiring cable connects your Vantrue dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the vehicle’s ignition is turned off.
- Add-A-Circuit fuse taps: These fuse taps crimp on to the end of the Vantrue direct-wire harness so you can plug the harness in to your fuse box. Your vehicle's factory warranty will remain fully intact!