Save a bundle with a BlackVue Dash Cam DIY bundle!
This page features our complete listing of BlackVue dash cam DIY installation bundle options. The BlackVue dash cam installation packs below are perfect for those looking for a one stop shop for a BlackVue dash cam and all the installation accessories needed to hard-wire your new dash cam yourself or by a professional.
You don’t have to search for all the installation tools and accessories that you need to hard-wire your BlackVue one by one! Simply purchase one of our install bundles below and you’ll have everything you need to seamlessly hard-wire your BlackVue dash cam in your car, truck, or SUV.
The BlackVue Dash Cam Bundles include:
- A BlackVue dash cam: A complete new-in-box BlackVue 1 or 2-channel dash cam from the DR900X, DR750X, DR590X or DR590 series.
- A Power Magic Pro *or* B-124X Battery Pack: The Power Magic Pro is a control module allows your dash cam to activate parking mode while your vehicle is turned off. The Power Magic Pro will detect if your car battery drops below the set volt threshold and will automatically turn itself off until you start your engine again. This will prevent you from ever having a dead car battery!
The B-124X is a dedicated battery pack so that the dash cam doesn't use your car battery at all when the vehicle is parked.
- Add-A-Circuit fuse taps: These fuse taps crimp on to the end of the the Power Magic Pro wiring harness or direct-wire harness so you can plug the power wires directly in to your fuse box. Your vehicle's factory warranty will remain fully intact!
- A circuit tester: This tool, also called a test light, will help you locate your fuse box 'always on' and 'switched' fuses. This will come in handy when you connect the direct-wire harness or a Power Magic Pro to the fuse box.