This page features our new Thinkware dashcam install bundles. The Thinkware dashcam installation packs below are perfect for those looking for a one stop shop for a front and rear Thinkware dashcam and all of the installation accessories needed to hardwire your new dashcam yourself (or by a professional).
You don’t have to search for all the installation tools and accessories that you need to hard wire your Thinkware one by one! Simply purchase one of our install bundles below and you’ll have everything you need to seamlessly hard wire your Thinkware dashcam in your car, truck, or SUV.
Each install bundle option includes a Thinkware forward-facing dashcam (the F800 Pro or the F100), an add-on rear-facing camera, and all the install accessories you will need for your new front and rear in-car camera system.
The Thinkware Dashcam Install Bundles include:
- A Circuit tester: This tool, also called a test light, will help you locate your fuse box’s "always on" and "switched" fuses. This will come in handy when you connect the Thinkware’s direct-wire harness to the fuse box.
- Thinkware hardwire kit: Thinkware's TWA-SH is a hardwiring cable that connects your Thinkware dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the vehicle’s ignition is turned off.
- Add-A-Circuit fuse taps: These fuse taps crimp on to the end of the Thinkware direct-wire harness so you can plug the harness in to your fuse box. Your vehicle's factory warranty will remain fully intact!