BlackVue DR590-1CH 1080p Single-Lens Dashcam Install Bundle

Introducing our new BlackVue "Do It Yourself" dashcam bundles! These DIY kits contain everything you need to seamlessly install a new BlackVue dashcam in your car, truck, or SUV.

Included in the Bundle:

1. BlackVue DR590-1CH 1080p 60fps Single-Lens Dashcam
2. Power Magic Pro (to enable "parking mode" recording)
3. Bundle of "Add-a-circuit" Fuse Taps
4. 12v DC Circuit Tester / Test Light (to help you identify your hot and switched fuses)

Bundle Item #1 - DR590-1CH:

This bundle includes BlackVue's mid-range single lens, forward facing dashcam, the DR590-1CH. If you're unfamiliar with this best-of-the-best dashcam from BlackVue, please click here or on the image below to open the DR590-1CH dashcam product page.

Bundle Item #2 - Power Magic Pro:

Free up your cigarette lighter power outlet and painlessly install a BlackVue DR590-1CH dashcam in your vehicle. The Power Magic Pro is a control module that allows the BlackVue dashcam to keep "watch" over your vehicle while your car is parked and you are away. The Power Magic Pro will also prevent a dead car battery: should your car battery drop below 12 volts, the camera will be turned off until you return to your vehicle and start your engine.

Click here or on the image below to learn more about the Power Magic Pro that is included in the DR590-1CH DIY Dashcam Bundle.

Bundle Item #3 - Circuit Tester:

Our included circuit tester (a.k.a. "test light") helps you quickly identify the correct "always on" and "switched" fuses in your fuse box, so you know exactly where to connect the Power Magic Pro's wire harness to the fuse box.

Click here or on the image below to learn more about our simple DC test light (circuit tester) that is included in the DR590-1CH DIY Dashcam Bundle.

Bundle Item #4 - Fuse Taps:

Bundles on bundles! We also include a bundle of nifty "add-a-circuit" fuse taps with this dashcam DIY bundle. Using a set of pliers, the fuse taps crimp on to the end of the Power Magic Pro's wire harness, then simply plug in to your fuse box! This way, your vehicle's factory warranty will remain fully intact, as there is no chance of damaging any wiring or other electrical components when using other more invasive methods of tapping in to a vehicle's electrical system. The fuse taps can be removed later if you need to sell or trade in your vehicle, leaving no trace that there was ever anything there, pretty cool!

Click here to learn more about our "add-a-circuit" fuse tap bundle that is included in the DR590-1CH DIY Dashcam Bundle.

Note: The DR590-1CH dashcam includes either a 16, 32, 64, or 128GB BlackVue memory card. You may choose the size above. The memory card is provided by BlackVue and is already inside the DR590-1CH retail box, ready to go! While the memory card is removable and the card slot will accept other brands of memory cards, we strongly suggest the use of only BlackVue memory cards in the BlackVue dashcams. The BlackVue OEM memory cards are industrial-grade and are designed to withstand the extreme high and low temperatures of being inside of hot and cold vehicles day in and day out, and they are also designed to cope with the constant read/write cycles of a high quality dashcam, without fail. To ensure your dashcam is always there when you need it, stick with the most reliable dashcam memory cards from BlackVue.

The DR590-1CH DIY Bundle includes FREE priority ground shipping within the continental United States. Expedited shipping may be selected during checkout for an additional fee. International shipping is not available on this item, except to Canada or Mexico.

Installation Photo Galleries

Honda Accord EX

*** In stock and shipping from Texas now! *** Order today!

Please note, BlackVue products can only be shipped to addresses inside the United States, Canada, or Mexico. We apologize for any inconvenience to our international customers.

The Dashcam Store™ is an official North American distributor of the BlackVue product line. Beware of unauthorized or grey-market third-party sellers!