The Vantrue USB-C hardwire kit is suitable for most cars and trucks (accepts input voltages of 12-24V). Free up your cigarette lighter power outlet for another device such as your cell phone or USB charger.
Vantrue's USB-C hardwire kit for N2S and N4 will enable parking mode safely: the kit will automatic power off when your car/truck battery voltage is detected to be too low, this will prevent your vehicle battery from dying.
Built-in fuse adapter, no need to use an extra fuse adapter.
This hardwire kit can be used by almost all USB-C devices like dash cams, GPS navigation devices, radar detectors, etc.
- Output Connector: USB-C
- Input Voltage: 12V-24V
- Output Voltage: 5V
- Output Current: 1.5A
- Working Temperature: -40 - 80°C
- Cable Length: 13ft (3.5M)
- Low Voltage Protection Threshold: 10.8V or 21.6V
- Vantrue E1
- Vantrue E2
- Vantrue E3
- Vantrue N1 Pro
- Vantrue N2S Dual Lens Dash Cam (Front + Interior)
- Vantrue N4 Triple Lens Dash Cam (Front + Interior + Rear)
- Vantrue N4 Pro
- Vantrue N5
- Vantrue S2
- Vantrue X4S
Looking for the Mini-USB Vantrue Hardwire kit for the N2, N2 Pro, S1, or X1? Click here! (Product page will open in a new tab)
The Dashcam Store™ is an authorized distributor for Vantrue dashcams and accessories in the United States.
Videos Hide Videos Show Videos
02 | How To Identify Constant and Switched Fuses | DIY Dashcam Installation by The Dashcam Store™
Shop Dashcam DIY Power/Installation Accessories: https://www.t...
03 | How To Identify a Proper Ground Point | DIY Dashcam Installation by The Dashcam Store™
In this how-to video we'll teach you step-by-step how to ident...