VIOFO OBD-II USB-C Direct-Hardwiring Kit | Comes with USB-C Cable

VIOFO OBD-II Direct-Hardwiring Kit | USB-C Dash Cam Parking Mode Cable

$110.42
$94.65
Price Match Guarantee!

The Dashcam Store's prices won't be beat! If you find a price from a reputable dealer that's lower than The Dashcam Store's, let us know and we'll match it. Get the best price AND the best service possible. Read more.

(You save $15.78 )
SKU:
VIOFO-OP100-USB-C
Availability:
Usually ships within 1 business day
Add to Compare

OR

Main Banner Image
VIOFO OP100 OBD-II Cable

The VIOFO OP100 is designed to power dashcams and mobile devices through the vehicle’s OBD-II port. Compared to common in-car power options like the cigarette lighter socket and hardwiring, offering several clear advantages.

This bundle includes an 11.5 ft VIOFO USB-C cable. Note: while any USB cable can power the dashcam, the camera will stay on continuously and will not enter parking mode. To enable parking mode, the VIOFO power cable must be used.

Easy Installation

Plug-and-play installation couldn’t be easier. Just connect the constant power cable to your vehicle’s OBD-II port and plug it into your VIOFO dashcam. This allows your dashcam to receive continuous power, even when the vehicle is turned off.

The OP100 also provides a more discreet wiring solution than a cigarette lighter connection, helping keep your interior clean and organized without exposed cables.

Single Column Image

Note: The location of the OBD-II port in a vehicle can vary slightly depending on the vehicle's make and model.

Dual Output Ports

The OP100 includes two output ports, with one prioritized for powering the dashcam. The additional Type-C port is a convenient extra for charging a mobile device.

Single Column Image

Adjustable Power Switch

The ON/OFF switch offers easy control of the dashcam's power supply, saving energy and preventing vehicle battery damage.

Parking Recording Time Switch

The time switch, offering three options (3h/24h/∞), controls the OBD power supply duration after the dashcam enters parking mode. When the time expires, it will automatically cut off the power.
Note: ∞ indicates that it provides continuous power supply.

Parking Mode Support

(Requires Optional Parking Mode Cable)

For dashcams, the OBD cable offers a simpler and more convenient method for parking-mode recording over the conventional fuse box hardwiring. After the car is turned off, the cable can provide continuous power, enabling the dashcam to enter parking monitoring mode seamlessly.

Single Column Image

Low Voltage Protection

The constant power cable helps protect your vehicle’s battery by shutting down within 90 seconds if it detects the voltage has dropped below 12V/24V. This helps prevent battery drain and ensures your vehicle can start normally.

Single Column Image

Box Contents

Single Column Image

Dimensions

Single Column Image
OBD Power Cable
Operating Temperature -10 to 50°C (14 to 122°F)
Input Supports 12V & 24V Systems
USB-A Output 5V / 3A
Type-C Output 5V / 3A, 9V / 2A, 12V / 1.5A
Low Battery Protection 12V / 23.6V
Output Connector:
Type C
Transcend USB 3.0 Memory Card Reader (TS-RDF5W) | Adapts Full Size SD and MicroSD Memory Cards to USB

Transcend

Transcend USB 3.0 Memory Card Reader

New USB 3.0! Transfer your files up to 10 times faster than a USB 2.0 card reader! The Transcend RDF5W memory card reader is the perfect pairing to your dashcam memory card. This device plugs into......

$47.32
$31.54
Add to Cart