The Dashcam Store™ exclusive; you won't find these plug-and-play kits anywhere else! We are proud to offer our very own line of patent-pending dashcam installation kits. Our hardwire kits are designed in-house and are proudly Made in the USA. Beware of cheap imitations!
We have made installing a dashcam in your vehicle simple and painless! This kit allows you to get rid of the standard cigarette lighter power cord, and safely tap in to your vehicle's electrical system. No cutting or splicing wires is required; this is important so that your vehicle's warranty will remain fully intact.
Installation is easy: just plug-and-play! All you need to do is tuck the output cable (the cord going to your dashcam) behind your interior panels from the dashcam to the fuse box, locate a "hot in start" fuse (a.k.a. switched fuse), and plug in our add-a-fuse style input connector. Then, attach the ground ring to a metal ground point on your vehicle's body, and you are done! A convenient power light is built-in to the housing so you will know you have done the installation correctly. For detailed instructions, please see our Advanced Dashcam Installation.
UPDATE: We've listened to your comments, and have revised our installation kits... now they're even better! The revised kits have a longer fuse tap lead (now 8" in length, 2" longer than before), and a longer output cable (now 15ft, 2.5' longer than before). On this particular kit, we've changed the coaxial (barrel) output connector from straight to right-angle, for an even cleaner installation!
Fuse Type Diagram
This kit contains a Mini fuse tap input connector.
Unsure which fuse type your vehicle uses? Check out our Universal Dashcam Installation Kit.
- Mini-fuse type input connector
- Adapts 12v or 24v vehicle electrical system to 5v for dashcam
- Can be configured for 12v dashcam (MUST SPECIFY 12v OUTPUT IN ORDER COMMENTS)
- Coaxial (Barrel) plug output connector
- Input Fuse Tap Length: 8in/20cm
- Input Ground Cord Length: 24in/61cm
- Output Cord Length: 15ft/4.5m
- Ground ring diameter: 1/2"/12.7mm
- LED light indicates power is on
- Up to 1000mA (1 Amp) output
- CE certified
- Lead-free construction
- Proudly Made in the USA